CORE VENT INSERTING TOOLS - $8.25 Each 

 

The inserting tool is a cylindrical bar of steel of suitable diameter approximately seven inches long having projecting tongues formed on one end.  These tongues are equal to in number to the slots in a vent of corresponding size.  (For example, the 5/8” vent has eight slots of equal width equally spaced.  The inserting tool has eight tongues formed on the same center distances as the slots and of suck a thickness that the tongues and slots will mesh.)  With the vent in position on the end of the inserting tool, it is easily driven or pressed into the bore in the box, while the tongues prevent the collapse of the slots.  With the vent seated in the box the tool is readily withdrawn leaving the vent with undamaged and equally spaced slots.

 

Two tools are available –

The OVERSIZE TOOL: has a shoulder 1/8” larger in diameter than the nominal size of the corresponding vent, which permits placement of the top on the vent flush with any plane surface in the core box. 

The UNDERSIZE TOOL: is approximately 1/16” smaller in diameter than the nominal size of the corresponding vent, which permits placement of the vent in corners, fillets, etc. 

G & G Slotted Core Vents, LLC                                                                                                                                                                                                                                 920-867-4200
Hortonville, WI U.S.A.                                                                                                                                                                                                                          ggcorevents@gmail.com